02 May GTR-KTP & HGTR-KTP
Posted at 10:40h
in GTR
Applications
- Industrial laser
- Medical laser
Advantages
- Low absorption at 1064nm & 5332nm
- Higher gray track resistance than a normal KTP
- Broad temperature bandwidth than normal KTP
- High efficiency than a normal KTP
Specifications
| Properties | |||
|---|---|---|---|
| Dimension tolerance | W(+/-0.1)*H(+/-0.1)*L(+0.5/-0.1)mm | ||
| Angle tolerance | +/-0.25° | Perpendicularity | ≤10' |
| Surface quality | 20/10 | Chamfer | ≤0.2mmx45° |
| Parallelism | ≤10" | Chips | ≤0.1mm |
| Flatness | λ/10@633nm | Clear aperture | ≥90% |
| Wavefront distortion | λ/8@633nm | ||
| Coating | C1 - AR@1064(R<0.2%)&532(R<0.5%) C2 - HR#1064(R>99.8%)&HT@532(T>95%) | ||
| Damage threshold | 500MW/cm² (1064nm), 10ns, 10Hz) | ||
Standard products
| P/N | Dimension |
|---|---|
| GTR or HGTR-KTP-S-2205-C1/C1 | 2 x 2 x 5mm |
| GTR or HGTR-KTP-S-2207-C1/C1 | 2 x 2 x 7mm |
| GTR or HGTR-KTP-S-2210-C1/C1 | 2 x 2 x 10mm |
| GTR or HGTR-KTP-S-3305-C1/C1 | 3 x 3 x 5mm |
| GTR or HGTR-KTP-S-3307-C1/C1 | 3 x 3 x 7mm |
| GTR or HGTR-KTP-S-3310-C1/C1 | 3 x 3 x 10mm |
| GTR or HGTR-KTP-S-4405-C1/C1 | 4 x 4 x 5mm |
| GTR or HGTR-KTP-S-4407-C1/C1 | 4 x 4 x 7mm |
| GTR or HGTR-KTP-S-4410-C1/C1 | 4 x 4 x 10mm |
| GTR or HGTR-KTP-S-5505-C1/C1 | 5 x 5 x 5mm |
| GTR or HGTR-KTP-S-5507-C1/C1 | 5 x 5 x 7mm |
| GTR or HGTR-KTP-S-5510-C1/C1 | 5 x 5 x 10mm |
| GTR or HGTR-KTP-S-6605-C1/C1 | 6 x 6 x 5mm |
| GTR or HGTR-KTP-S-6607-C1/C1 | 6 x 6 x 7mm |
| GTR or HGTR-KTP-S-6610-C1/C1 | 6 x 6 x 10mm |
| GTR or HGTR-KTP-S-2205-C2/C1 | 2 x 2 x 5mm |
Non-Standard products
Contatct us in case of special interest